Here’s How You Can Trace A Plumbing Leak

Here’s How You Can Trace A Plumbing Leak

Unfortunately, it is difficult to trace a plumbing leak. However, it is quite important since a leaking pipe can easily cause a lot of damage. Finding the leak source is all about the leak that you have. Leaking pipes present under sinks, for instance, are really easy to discover. A leak that is present inside a wall or the ceiling is much more difficult to locate.

Here’s How You Can Trace A Plumbing Leak

According to leak detection Melbourne area specialists Fix It Right plumbing, the very first step you need to take is always to trace the leak. This is only possible through an inspection of every single room of the home until the leak is identified.

Confirming The Leak

Start by moving away appliances so you check for moisture. For instance, if the supply line of your dishwasher is damaged, water is going to leak all around it. When you cannot discover the moisture source, turn off the water faucets. Also, turn off the supplies for all fixtures using water. Leave all appliances, faucets and fixtures off for around 8 hours. Then, check the water meter. When the needle moved, it is a sign that there is a leak.

Bathrooms And Kitchens

Open the cabinet doors under your sinks and use a flashlight to find moisture present at joints or at the P trap’s bottom. If there is a leaking pipe present, you might notice corrosion present on the valves and fittings of the water supply line. Remove everything from the cabinet and see if there is dampness, water stains, mildew or peeling material present. All these indicate the presence of a water leak.

Wipe away the moisture and then tighten the fittings. See if this solves the problem by using the same steps mentioned above. If the leak is still present, you might have to replace the supply line.

Ceilings, Walls And Floors

Examine flooring around all appliances that are using water, like bathtubs and toilets. If you see spongy spots or warped flooring, a possible leak might be present. Then, examine ceilings and walls in the rooms that are under the bathrooms. Stains or paint that is peeling are signs of pipe leaks. Whenever you see signs of water leaks on floors, walls and ceilings, the best thing that you can do is to contact a professional plumber. Only someone with experience should identify the leak since when you do it alone, without knowledge, there is a good possibility more harm than good will be done.

Crawlspaces And Basements

You can inspect the exposed pipes in crawlspaces and basements without a problem. If you see moisture or corrosion present, a water leak might be present. When you see rotted wood, mildew or mold around pipes, you identified the possible location of the leak. Remember that water usually travels downward. In many cases, water stain location is not where the leaking pipe is actually present. Even so, it is a really good indicator of the source of moisture. If you cannot get into tight areas, do contact a professional as special identification methods might be needed.